KEYGON symbolKEYGON
Factory VRGet a Quote
Get a quote
QIGONG / Keygon  ·  Electric gates / Cantilever Gates

Smart Automatic Cantilever Sliding Gate

A rail-free cantilever gate that keeps the leaf fully suspended above the ground, so debris, water, snow and slopes do not interrupt the run. A reinforced beam and 6063 aluminium alloy structure are built for wide openings and high-frequency vehicle traffic.

12 m/minLeaf travel speed
450 WMotor power
6063Aluminium alloy
18 m / 12 mBody limit / clear span

Optional equipment: ANPR / licence plate recognition, infrared safety photocells, anti-climb alarms and scrolling LED displays. Select the required accessories with the quotation; basic motor and mechanical protection follow the configuration table.

Plan this entrance

Price and model
start with your opening

Send the clear width, the space beside the opening and how many vehicles pass each day.

Your inquiry is submitted securely to KEYGON. You can also contact us by email or WhatsApp.

Model codes, materials and options are confirmed on the order drawing.

Q19 retractable gate reference videoQ19 伸缩门参考视频

Video model: Q19 Retractable Gate. For a demonstration of this cantilever gate, contact KEYGON with your selected product and project requirements.

Where is it used?Industrial parks, factories, schools, airports, railway stations, hospitals and commercial facilities.
What decides the model?Clear opening, side space, leaf length, ground conditions and whether the gate is trackless.
What can be added?APP, Bluetooth, RFID, fingerprint, licence plate reading, infrared beams and anti-climb alarm.

Six details that decide how the gate behaves

The six panels below follow the feature graphics and written information on the official Smart Automatic Cantilever Sliding Gate product page.

High-power motor - Smart Automatic Cantilever Sliding Gate

High-power motor

A high-strength aluminum motor housing delivers strong traction, efficient heat dissipation and smooth soft-start / soft-stop operation for frequent daily use.

  • High-strength aluminum alloy housing
  • Overheat and overload protection
  • Soft start, stable running, low noise
Intelligent LED display - Smart Automatic Cantilever Sliding Gate

Intelligent LED display

A fixed LED display shows operating status or custom messages. Its windproof, waterproof enclosure stays readable in outdoor installations.

  • Scrolling prompts and custom text
  • Weather-resistant fixed display
  • Low power consumption
High-density aluminum - Smart Automatic Cantilever Sliding Gate

High-density aluminum

The main beam uses high-strength carbon steel or aluminum alloy with hot-dip galvanizing and powder coating, combining structural rigidity with corrosion resistance.

  • 6063 aluminum alloy option
  • Hot-dip galvanized steel option
  • Multiple RAL colors available
Intelligent infrared sensor - Smart Automatic Cantilever Sliding Gate

Intelligent infrared sensor

Optional infrared anti-pinch and anti-collision protection stops and reverses the gate when people or objects are detected; anti-climbing sensing triggers an alarm.

  • Infrared anti-collision
  • Anti-climbing alarm
  • Emergency stop interface
Heavy-duty cantilever beam - Smart Automatic Cantilever Sliding Gate

Heavy-duty cantilever beam

A reinforced cantilever beam keeps the gate suspended above the ground, spanning uneven terrain, slopes, ice, snow and railway crossings without a floor track.

  • No ground track required
  • Withstands wind and heavy loads
  • Suitable for slopes and rough ground
Rack-and-pinion transmission - Smart Automatic Cantilever Sliding Gate

Rack-and-pinion transmission

An external motor drives through a close-fitting gear and rack, with an independent protective chassis for stable transmission, fast heat dissipation and easy maintenance.

  • No slipping during operation
  • Independent motor chassis
  • Convenient inspection and repair

Specifications and configuration

Review the dimensions and equipment below, then send your site measurements to confirm the final build and selected accessories.

Smart Automatic Cantilever Sliding Gate official parameter drawing
Configuration summary
DesignTrackless cantilever, fully suspended above ground
Body limit18 m body length; 12 m clear opening (official product page)
Travel speed12 m/min
Motor450 W with overheating and overload protection
Material6063 aluminium alloy; main beam in carbon steel or aluminium alloy
SurfaceHot-dip galvanizing and spraying treatment
SafetyAnti-collision rubber strips and motor overload protection; infrared anti-collision and anti-climb alarms optional
ControlRemote, radar sensor, safety photocell and access control integration
DriveExternal gear-and-rack motor in a separate protective chassis
Warranty12 months standard component warranty
Opening = measured clear span Build = confirmed on order drawing
Nominal model names and series figures are designations. Built length, leaf count and stored footprint are confirmed against the measured site.
Standard and optional configuration
ItemStandard on Smart Automatic Cantilever Sliding GateOptional
Body6063 aluminium alloy cantilever leafCustom span, height, colour and panel style
AccessHand-held remote controlAPP, Bluetooth, RFID, fingerprint, ANPR and face recognition
SafetyAnti-collision rubber strips and motor overload protectionInfrared beams, anti-climb alarm and emergency stop
DisplayLED status display where shownScrolling text and custom messages
Service12 months standard component warrantyExtended warranty and on-site installation by agreement

What usually goes wrong at a wide vehicle entrance

Four problems we size and specify against, and the parts of Smart Automatic Cantilever Sliding Gate that answer them.

Site problem

Debris and water block a ground track

Traditional sliding gates lose reliability when gravel, silt, ice or standing water collect in the floor channel.

Our approach

Choose a fully suspended cantilever leaf

The gate runs above the ground with no floor rail, so vehicles and service teams pass without a track to clean or repair.

Configuration · trackless cantilever + reinforced beam
Site problem

Wide openings need stable structure

Long leaves flex under wind load and drift off line, which accelerates roller and guide wear.

Our approach

Put strength into the main beam

A heavy-duty cantilever beam and high-strength carbon steel or aluminium alloy structure keep the leaf stable across the span.

Configuration · reinforced beam + hot-dip galvanizing + powder coating
Site problem

Peak hours cannot wait for manual gates

Shift changes and delivery peaks turn a manually opened entrance into the site bottleneck.

Our approach

Automate and integrate with access control

Remote, radar, photocell and access-control interfaces let authorised vehicles keep moving while the post handles exceptions.

Configuration · remote + optional LPR / RFID / access controller
Site problem

People and vehicles share the same lane

Pedestrians crossing a moving leaf create a safety risk at busy industrial and campus entrances.

Our approach

Detect and separate the flows

Optional infrared anti-collision and anti-climb alarms can be specified alongside a separate pedestrian gate to support the site safety plan.

Optional configuration · IR anti-collision + anti-climb alarm + pedestrian separation
Every configuration above is a starting point. Final scope depends on the measured opening, ground conditions and the access rules at the site.

Where Smart Automatic Cantilever Sliding Gate is specified

Industrial parks, factories, schools, airports, railway stations, hospitals and commercial facilities — anywhere a wide vehicle opening needs controlled access.

Smart Automatic Cantilever Sliding Gate installed at a vehicle entrance Indicative reference only. Running gear, side clearance and pedestrian separation are fixed on the site survey.

Industrial parks and factories

Wide vehicle entrances with continuous truck and forklift traffic.

Schools and universities

Reliable daily operation during concentrated arrival and dismissal peaks.

Airports, railway stations and ports

High-traffic access where a floor rail would disrupt movement.

Hospitals and commercial facilities

Quiet, low-maintenance access with a clean architectural finish.

Deployment reference

Series application and installation references. Match the final leaf style, finish and access equipment to your project specification.

Smart Automatic Cantilever Sliding Gate reference installation 1
Smart Automatic Cantilever Sliding Gate reference installation 2
Smart Automatic Cantilever Sliding Gate reference installation 3
Typical configuration
Smart Automatic Cantilever Sliding Gate, aluminium alloy leaf, remote control and project-specific access options
Site types
Industrial parks, factories, schools, airports, railway stations, hospitals and commercial facilities
Status
Series application reference

Buying questions

How is the gate sized for my entrance?
Start with the clear span between posts, then check the side and parked-leaf space. The official page lists an 18 m body limit and a 12 m clear opening; the built length is fixed on the order drawing after survey.
Does it need a track in the ground?
No. The leaf is fully suspended by its cantilever support structure, so there is no floor rail to collect debris or water. It suits slopes, grass, ice, snow and railway crossings.
What material and finish are used?
The gate body is made from high-quality 6063 aluminium alloy with no welding points. The main beam can be high-strength carbon steel or aluminium alloy, with hot-dip galvanizing and spraying for corrosion resistance.
What safety functions are available?
Anti-collision rubber strips are fitted to the front section, infrared anti-collision sits between the gantry frames, and an infrared anti-climb device triggers an alarm horn. Emergency stop and access interlocks can be integrated.
How does the motor behave under heavy use?
The 450 W motor includes overheating and overload protection. An external gear-and-rack drive in a separate chassis keeps transmission stable, dissipates heat quickly and simplifies maintenance.
How are the final specification and accessories confirmed?
Confirm the total assembly size, measured clear opening, ground condition, power supply and required access methods with KEYGON. The quotation and approved order drawing identify the supplied equipment and accessories.
What is the delivery time and warranty?
The standard component warranty stated for this range is 12 months. Confirm current lead time, shipping, installation responsibilities and any agreed extended cover with the quotation.

Get a model and a price for your opening

Send the clear width, the space beside or behind the opening and the number of vehicles per day. We will come back with a model, a length and the options that actually apply.

Useful to include: a photo of the entrance, the ground surface, whether the gate is trackless or guided, and any existing access control.

Your inquiry is submitted securely to KEYGON. You can also contact us by email or WhatsApp.